|
|
[Product List Fuel Additives and Fuel Catalysts] [Fuel Catalysts and Fuel Additives Home Page] [Applications Sheet Fuel Additives and Fuel Catalysts] [Applications all ProTec's Products] [Contact us] [Home] FUEL CATALYST TECHNICAL BULLETIN PT-FUEL OIL Fuel catalyst (fuel additive) with remarkable properties that improve considerably the performance of even fuels of mediocre quality. Adding our catalyst to fuels dramatically improves combustion so that toxic emissions released into the air are dramatically reduced with major savings in fuel consumption and equipment maintenance. PT-Fuel Oil is used where the fuel burning is an open flame such as that found in the burner of a furnace/boiler. With PT-Fuel Oil, there is almost complete combustion taking place right before your eyes. Here the flame can be observed to improve from a long, lazy, smoky-orange, dirty flame to a compact, vibrant, bright lemon-yellow clean flame. PT-Fuel Oil is used in oil-burning homes, apartments, office buildings, industrial plants and electric power utility plants (furnace/boiler and vessel engine thermal power plants). PT-Fuel Oil dosages is typically 1 liter to 4,000 liters of fuel oil. Depending on the quality of fuel and state of the burning equipment, dosage can vary from 1 liter to 2,000 and 6,000 liters of fuel oil. NOTE: With all ProTec fuel catalysts (fuel additives), it is best to double the dose at the time of first use. Some users find a heavier than recommended dosage to be more cost-effective on a continuous basis. In all ProTec's Fuel Catalysts (fuel additives), the user can expect to see true cost-effectiveness, where the money savings from less fuel used more than offsets the cost of the catalyst. All ProTec Fuel catalysts are excellent Pollution Reducers and Fuel Extenders. Packaging: 55 gal. drum, 5 gal. pail More information on our fuel catalysts ProTec's Catalysts as Replacement to TEL (Tetra Ethyl Lead) and MTBE (Methyl Tertiary Butyl Ether) PT-Fuel Oil additional information PuraFuel Oil and PuraFuel Oil Maritime for the treatment and prevention of microbial growth PuraFuel Oil for Heavy Fuel Oil (HFO) Treatment PuraFuel Oil in Power Plant - Vessel Diesel Engine PuraFuel Oil Maritime for Steamships and Motor Vessel PuraFuel Oil & PuraFuel Oil Maritime for Bunker C Treatment and Engine Efficiency Improvement PuraFuel Oil - Possible results after Application ----------------------------------------------------------------------------------------------------------------------------------------------- [Product List Fuel Additives and Fuel Catalysts] [Fuel Catalysts and Fuel Additives Home Page] [Applications Sheet Fuel Additives and Fuel Catalysts] [Applications all ProTec's Products] [Contact us] [Home] |