|
|
[Product List Fuel Additives and Fuel Catalysts] [Fuel Catalysts and Fuel Additives Home Page] [Applications Sheet Fuel additives and Fuel Catalysts] [Applications all ProTec's Products] [Contact us] [Home] FUEL CATALYST TECHNICAL BULLETIN PT-DIESEL Fuel catalyst with remarkable properties that substantially improve the performance of even fuels of mediocre quality. Adding our catalyst to fuels improves combustion so that toxic emissions released into the air are greatly reduced with major savings in fuel consumption and equipment maintenance. KEEPS FUEL AND DELIVERY SYSTEMS IN PEAK CONDITION FOR ALL DIESEL ENGINES NO MECHANICAL ADJUSTMENTS NEEDED Improves engine combustion and performance Greatly reduces fuel consumption Dramatically reduces smoke and polluting exhaust Keeps injectors and filters clean Adds more power to the engine Eliminates carbon deposits Reduces or eliminates black smoke Reduces maintenance costs Purges sludge and water buildup Reduces noises and increases engine power Requires less gear shifting Continuous use of PT-Diesel: Keeps internal engine parts clean and improves equipment life, adding many years to the life of the engine and greatly reducing downtime and maintenance costs. PT-Diesel is primarily used in diesel fueled trucks and cars, construction vehicles, tractors and earth movers, large fishing boats, ferry boats, locomotives and stationary land based diesel engines such as generators. With PT-Diesel there are substantial fuel savings, a noticeable decrease in vehicle exhaust smoke, and reduced maintenance costs. Reports of premature fuel injector pump and fuel delivery system failures are surfacing at an alarming rate. Using low sulfur diesel fuels, even if this new fuel has been designed to reduce emissions, the overall consequences are devastating owners of diesel powered vehicles. Many diesel owners are reporting unexpectedly costly and premature damage. Unfortunately, many owners think the damage to the fuel delivery system is just normal wear and tear. They do not realize that these problems are due to the loss of lubricity caused by sulfur reduction. Problems usually start with the retraction of the O-rings. Also, pintle valves start to leak where the gasket and injectors meet. It has been diagnosed that due to the severe hydrotreating processing of the diesel fuel to reduce sulfur, the lubricity of the fuel is greatly lowered. Lubricity is a vital element of the fuel for proper functioning of the delivery system. The lack of it causes galling of the fuel pumps, especially spader types with retractor valves. The retractor valve stays open and they get full pressure at the rack at all times. This epidemic of premature fuel injector pump failures, caused by low sulfur diesel fuel, can be treated by replacing the lubricity with PT-Diesel. This product was developed especially to combat many diesel related problems. PT-Diesel' s advanced technology is the only known cure for this epidemic. When PT-Diesel is added to the fuel, it replaces and maintains boundary lubricity to the infected parts and also creates nearly complete combustion which has the effect of turning diesel fuel into the most economically efficient, cleanest, non-polluting fuel in the world. It achieves this by separating fossil molecular chains into small uniform sizes and then coating them with a special heat seeking formulation (combustion modifier) which makes them easier to burn. Black smoke, noxious fumes, annoying noises and high-particulate exhausts have been substantially reduced with PT-Diesel. Reports from fleets and individual driver/owners who have used PT-Diesel say they are not only getting the benefit of insuring against premature breakdown from low sulfur fuel, but notice significant fuel saving of 10% or more. And, as a big plus, exhausts no longer pollute. NOTE: With all ProTec fuel catalysts, it is best to double the dose at the time of first use. Some users find a heavier than recommended dosage to be more cost-effective on a continuous basis. In all ProTec Fuel Catalysts, the user can expect to see true cost-effectiveness, where the money savings from less fuel used more than offsets the cost of the catalyst. All ProTec Fuel catalysts are excellent Pollution Reducers and Fuel Extenders. IMPORTANT: The use of the powerful combination of PT-Dieseland ProTec's Super Lubricants and ProTec's Super Lubricants PuraLube Pre-Mixed in Oil results in additional substantial maintenance-cost reductions and fuel savings. Packaging: 55 gal. drum, 5 gal. pail, 32 oz bottle --------------------------------------------------------------------------------------------------------------------------------------------------- [Product List Fuel Additives and Fuel Catalysts] [Fuel Catalysts and Fuel Additives Home Page] [Applications Sheet Fuel additives and Fuel Catalysts] [Applications all ProTec's Products] [Contact us] [Home]
|