[Back to Solvents & Cleaners industrial replacement products] [Contact us]

TECHNICAL BULLETIN

PURA FORMULA 88 

VOC 805; USDA C1; 1,1,1 Replacement

Pura Formula 88 is an environmentally safe, non-toxic, high purity citrus solvent that does not contain petroleum distillates or chlorinated solvents. Effectively degreases dirty motors, molds, and heavily soiled equipment. Removes glues, cosmolene-type protectants, tar, ink, and floor mastics. Declogs drains and grease traps of grease, grime, oil and soap scum. Pura Formula 88 is also excellent for removing oil, grease and food stains from rugs and upholstery.  Emulsifies tire and scuff marks. Excellent deodorizing ability. Contains emulsifiers that will allow an effective water rinse or dilution for other cleaning applications.

All purpose cleaner: Sponge or spray on.  Let stands 2-4 minutes. Rinse with clean water. 

Engine/motors: Spray into surface. Let stand 3-5 minutes. Rinse with warm water.

Drains:Pour 3-5 ounces of Pura Formula 88 directly into drain.  Let stands 8-10 minutes. Run hot water through drain.  Do not allow product to come in contact with acids or oxidizing agents. Do not use in combination with, or mix with any sulfuric acid drain opener as a violent exothermic reaction can occur.

Grease traps: Use approximately 5 ounces per day in traps.  For large traps, use 8-10 ounces per day.

General purpose deodorant: Spray mist into air to counter bad odors. To deodorize surfaces, spray light mist. Dilute 2-4 ounces per gallon and mop on or spray on malodorous surfaces (kennels, garbage dumpsters, etc.).

Tar/asphalt removal: Apply Pura Formula 88 to surface. Let stand 3-5 minutes. Rinse. to surface. Let stand 3-5 minutes. Rinse.

Rug & upholstery spot removal: Pour Pura Formula 88 onto cloth or sponge and apply to oil, grease or food stain.  Blot area. Repeat if necessary. Always test on an inconspicuous section before using.

Scuff & tire marks: Apply to area.  Leave 3-5 minutes. Rinse.

Soap scum: Apply with sponge. Leave on 3-4 minutes. Rinse.

Concrete stain removal:Apply Pura Formula 88 to surface. Leave on for 2-4 minutes. Rinse.

Technical Data

Color	Yellow
Clarity	Clear
Odor	Citrus
Pounds per Gallon	7.3
Rinseability	Excellent
Emulsion in Water	Excellent
Percent Active Ingredients	100%
Type Active Ingredients	Distillates of naturally citrus plants, emulsifiers, surfactants
Stability	One year minimum
pH	Neutral
Flash Point	118ºF
Percent Petroleum Distillates	None
Percent Chlorinated Solvents	None
Percent Glycol Ethers	None

 

PackagingPackaging: 55 gal. drum, 5 gal pail, case 4 bottles 1 gal.