[Product List] [Applications] [Longa-Tire Home Page ] [Longa-Tire Q&A] [Longa-Tire Installation] [Longa-Tire Installation Industrial ] [Back to Flat Tire Preventative] [Contact us] [Home]

FLAT TIRE PREVENTATIVE - Longa-Tire instantly and permanently seals punctures


Longa-Tire Reference Manual                                          

Installation Instructions

5 Gallon Container Installation Instructions

The tire sealant is ready for use. There is no mixing required.

Remove small vent cap on top of the pail. Pull rings and unscrew the large cap. Remove the inner seal and insert pump.

Connect the hose to the metal vent on top of the pail and operate the pump to initially fill the pump and hose.

Tire should be properly balanced prior to installation (if required). There is no need to deflate the tire. The pump will work against 50 to 60 psi. You will need to reduce the air pressure in some tires to the operating range of the hand pump.

Remove the valve core and attach the hose connector to the valve stem on the tire.

Stand over the pail and pump the recommended amount of the tire sealant into the tire with firm, smooth, full strokes. If the pumps jams, DO NOT FORCE THE PUMP, as damage to the pump may occur.

Simply disconnect the hose from the valve stem and allow the air pressure from the tire to push the plug from the valve stem. Sometimes in low pressure tires, it may be necessary to use a small diameter drill bit to work the plug free.. Reconnect the hose and continue pumping.

After the installation is complete, disconnect the hose from the valve stem and reconnect it to the metal vent. Replace the valve core and inflate the tire to its correct pressure.

If the tire has a puncturing object, drive a short distance (4-5 miles) to allow the sealant to loosen and evenly spread. Remove the puncturing object and continue to drive. This will allow the sealant to work into the puncture to form a permanent seal.

[ Diagram of 5 gallon Pump ]Do not remove the puncturing object without first driving the vehicle to allow the sealant to loosen and spread within the tread.

[Product List] [Applications] [Longa-Tire Home Page ] [Longa-Tire Q&A] [Longa-Tire Installation] [Longa-Tire Installation Industrial ] [Back to Flat Tire Preventative] [Contact us] [Home]